Applicable occasions of oil level sensor

Small and exquisite oil level sensor industrial grade, the oil level sensor is suitable for the measurement of oil quality below 5MPA and the temperature is below 200℃ and the viscosity is not high. Various protocols can be attached to the communication

Automobile-specific oil level sensor is suitable for the measurement of various fuel oils under normal temperature and pressure. The output damping time is adjustable from 30 to 180s and can be equipped with 485 communication.

Standard oil level sensor industrial grade, suitable for measuring viscous oil quality below 5MPA and temperature below 200℃. Various protocols can be added for communication

High temperature and high pressure oil level sensor industrial grade, suitable for measuring various oil quality below 32MPA and temperature below 250℃, and can be attached to various protocol communications

Oil level sensor Universal oil level sensor is suitable for the measurement of various fuel oil and hydraulic oil under normal temperature and pressure, with 485 communication

Operating procedures

First of all: put the gasoline clean, then rinse with water two to three times, and install it according to the following steps.

1. Positioning:

The principle is generally in the middle of the fuel tank, avoid the original oil float position.

2. Clean the dirt at the opening of the fuel tank

Remove the oil on the installation position of the fuel tank